48m3 Customized Sectional SS Water Tank, Square Welded Stainless Steel Water Tank
Stainless steel water tank is a new generation after glass fiber reinforced plastic water tank. It selects the import food level SUS stainless steel plate. It is stainless, no distortion, no leakage, high tensile strength, easy to maintain and repair, cost saving, long-term usage. Compared with other tanks, stainless steel water tank is light weight, high strength, corrosion resistant, high temperature resistant, high water quality, seepage control, anti earthquake, no moss, no secondary pollution to water quality, easy installation, low maintenance cost, easy cleaning, etc.
| Tensile Strength |
≥70MPa |
| Flexural Strength |
≥100MPa |
| bending modulus |
≥7.0GPa |
| Barcol Hardness |
≥60MPa |
| Water Absorption |
≤1.0% |
| Fiberglass content |
≥25 25% |
| Light transmission |
Nil |
| Outdoor weathering (Natural sunlight) |
Stabilized |
| Toxicity |
Nil |
1. Water tank capacity: 100-1000000 liters.
2. Board size: 0.5*0.5m, 1.0*0.5m, 1.0*1.0m, etc.
3. Wall board thickness: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, etc.
Choose the right product; never let you down!
Our tank is SS304 SS316 tank, it is good for long time usage, no rust!
Feature
1) Light weight, high strength.
2) Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof.
3) Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.
4) Corrosion resistant; anti-rust.
5) Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned easily and Manhole panel makes it easy to enter into the water tank inside.
6) Non-toxic, it is made from food grade resin, clean and no pollution. Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.
7) Convenient Installation: Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation.
Modular sectional stainless steel water tanks are packed with pallet and wooden case.
Installation
With the right equipment and personnels, you can assemble the tank quickly. For a successful tank installation, you need at least five workers, one of whom should be qualified.
Here is a brief installation guide:
* After getting a permit to install on a particular site, ensure you have all the required equipment.
* They should be free of damage to prevent a substandard finish.
* Check that the area of installation is level.
* Assemble the beams horizontally on the foundation or steel tower to form the skid base.
* Install the bottom panel carefully on the skid base.
* Install the side panels. Once the side panels are in place, you can put up the panel partitions.
* The panels should be joined using bolts and nuts, as per the manufacturer's recommendations.
* Install the tie rods and stainless steel partitions to support the roof.
* Assemble the top cover/roof.
* Install internal and external stainless steel ladders.
* Tie all stainless steel nuts and bolts with a washer.
After completing the installation and getting approval from a consultant, carry out a water leakage test. Connect a temporary water supply pipe and let the water stay in for at least 24 hours. Make sure you have enough air vents. If there are any leakages after the test period, rectify and seek approval.
For installation, we can provide installation guide: installation video or installation assistance on site by our engineers.If parts are damaged within the quality insurance period because of quality fault, we would change the damaged parts free of charge.
Audited Supplier 
){kind=link}
){kind=link}