| Customization: | Available |
|---|---|
| Certification: | ISO9001 |
| Wall Thickness: | 5mm |
|
Still deciding? Get samples of US$ 90/cubic meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Stainless steel storage tank is made out of the 304 or 316L. This stainless steel storage tank, Internal and external mirror polishing, fillet welding of tank no dead Angle, easy to clean.Discharge outlet at bottom. It suits the purification area of pharmaceutical industry very much. The liquid compounding of food or fermentation and the treatment of water is likely to used it.Our company can provide you with custom-engineered pharmaceutical storage containers. The sampling place, inlet and outletof liquid, hole for reservation and inlet and outlet of head/cold medium can all be customized to meet your unique processing and storage needs.
| Height | Bottom Board | Side 1 | Side 2 | Side 3 | Side 4 | Side 5 | Top board |
|---|---|---|---|---|---|---|---|
| 1000 mm | 2.5 mm | 1.5 mm | 1.5 mm | ||||
| 1500 mm | 2.5 mm | 1.5 mm | 1.5 mm | 1.5 mm | |||
| 2000 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm | |||
| 2500 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm | ||
| 3000 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm | ||
| 3500 mm | 3 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm | |
| 4000 mm | 3 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm | |
| 4500 mm | 4 mm | 3 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm | 1.5 mm |
| 5000 mm | 4 mm | 3 mm | 3 mm | 3 mm | 2.5 mm | 2 mm | 1.5 mm |
Installation reference:
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Stainless steel panels to be pre assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
Hengshui Nuokon is located in Hebei Province in the north of China. Relying on its unique talent advantages and technical support, it focuses on the production and sales of cooling tower fillers, cooling tower accessories, septic tanks, water tanks, water treatment and outdoor protection safety products.
Thanks for browsing our products,send your Inquiry Details in the Below, Click "Send" Now!
♣Contact with me online,skype,email
){kind=link}