19mm sheet space pvc water cooling tower fill Cross flow cooling tower infill
Cooling tower fill is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation.
cooling tower fill fetures:
1. Greater cooling capacity in a given space
2. Low-clog designs available
3. Available in bottom supported or hanging designs
4. FM approval available
5. Crossflow and counterflow designs
6. Integral louvers and eliminators available in crossflow design.
7. High-temperature designs available
8. Single-piece, full-height counterflow designs available
Specification for Cross flow cooling tower fill as following:
Item |
Cooling tower fill |
Module Width |
mm |
610mm, 750mm, 813mm, 915mm, 1000mm, 1220mm, 1520mm |
Flute Height |
mm |
19 |
Flute Corrugation Angle |
degrees |
- |
Surface Area |
m2/m3 |
150 |
Sheet Thickness - Before Forming |
mm |
0.32-0.6mm |
Max. application temp. (short time) - PVC |
°C |
60 |
Max.operating temp. (short time) - High temp. PP |
°C |
80 |
Customized size and thickness available for special request. Contact us for details! |