| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 12months |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Height 145mm Pitch 30mm Marley Crossflow Cooling Tower Cellular Drift Eliminator PVC Replacement
| Name | 145mm Marley Cooling Tower Parts Cellular Drift Eliminator |
| Dimension | length random, width random |
| Sheet height | 30mm |
| Sheet thickness | 0.4mm-0.6mm |
| Material | PVC |
| Application | drift eliminate in cooling tower |
Cellular drift eliminator is developed when eliminator designs were primarily ineffective blade type configurations. No other eliminator could come close to this eliminator's low drift rate and low pressure drop. Now, virtually every eliminator is a nesting cellular PVC type design.
It is a more advanced design that meets or exceeds today's demanding specifications for drift emissions without sacrificing fan horsepower. Drift rates are currently half that of the original design with equivalent pressure drop.
The eliminator discharge angle is important enough to warrant two separate eliminator designs-one for crossflow and one for counterflow towers. Tests show the air direction leaving the eliminator is extremely important-imperfect designs create additional work for the fan. This means either increased fan horsepower-or reduced cooling tower performance. The crossflow version features drainage slots within the eliminator pack to ensure trapped drift is returned to the wet side of the cooling tower.
Low drift rate is the primary goal of eliminator design. It boasts typical drift rates of .001% of the total GPM. Lower drift rates are available depending upon tower configuration. Considering low drift rates and low pressure drop, it is one of
the most effective cooling tower drift eliminator available in the market place today.
/ Suggested Specification /
Drift eliminators shall be of cellular type approved equal. The eliminators shall be thermoformed from 17 mil (.017″) PVC (polyvinyl chloride) material into a configuration providing at least three changes of air direction and solvent welded into multiple sheet packs. Flame spread rating of the material must not exceed 25 per ASTM E-84. Eliminators used in crossflow towers must provide a discharge angle (as defined by the angle of the last section of the eliminator itself) of at least 42° from the horizontal when installed.
The eliminator packs shall be able to span 66″ unsupported for counterflow configurations and 72″ for crossflow, with minimal deflection at design conditions. Eliminators shall be FM approved.
Eliminator packs shall measure up to 24″ wide, 5.75″ in depth and up to 12′-0″ long.
Detailed pictures for Height 145mm Pitch 30mm Crossflow Cooling Tower Cellular Marley Drift Eliminator PVC Replacement
Package of Height 145mm Pitch 30mm Marley Crossflow Cooling Tower Cellular Drift Eliminator PVC Replacement:
Application of Height 145mm Pitch 30mm Marley Crossflow Cooling Tower Cellular Drift Eliminator PVC Replacement
Related products of Marley cooling tower:
Other various cooling tower spare parts:
1.Q: Are you Trading Company or Factory:
A:. We are Trading Company and also Factory
2.Q: What's your production ability for one month?
A:We can product Metric Tons per Month 200000 pcs .
3.Q: What's your MOQ?
A:100pcs
4.Q:What's your shipping port?
A:Tianjin,shanghai or any port as your reqirement
5.Q: What's your Payment Terms?
A:L/C,T/T,Western Union
Try order is acceptable. Sample is available.
Welcome to inquire, we will feedback within 24 hours.
){kind=link}