| Customization: | Available |
|---|---|
| Certification: | ISO9001, SGS |
| Wall Thickness: | 1.5mm-5mm |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
What is SMC material?
1. Sheet Molding Compound is a fiber-reinforced material, which consists primarily of a thermosetting resin glass fiber.
2. SMC is a high tech material that is used in the manufacturing process in most of our products ranges.
3. The advantage of SMC include, high impact compressive, flexural and tensile strength along with temperature stability.
4. SMC has low profile, low shrink for excellent surface appearance and painting.it's color pigmentable and has excellent
chemical and electrical resistance varied to provide insulation, conductivity or anti static properties.
SMC Water Tank is made of Fiberglass reinforced plastics which is divided in FRP Modular type and SMC combination
type. The major advantage is light weight, anti-rusted, non-leakage, long durable time and easy to clean. It is widely used in
hotel, school,hospital and coal mine enterprise. 
Characteristic of SMC water tank
1. It is the water tank of new type adopted in the world presently,and is assembled by wholly good qualitied SMC plates.
2. Food grade resin is adopted,so the quality of water is good and clean ,without pollution, high strength, light weight,
corrosion resistant, nice appearance, long service life ,easy to maintenance etc.
3. It is widely used in mine industry ,enterprises &public institutions,house,hotels, etc. and serves ad the water storage
facility for drinking water,sewage water for treatment ,water for fire distinguish,and other water.
4.we can assemble water tank with volume from 1m3 to 1000m3.if the original water tank needs to be changed,housing
is not needed to be modified ,so it possesses high suitability .sealing belt is especially studied for fixed typed products,
this kind of sealing belt is non-toxic ,water resistant,with high elastic property ,and fastened .Our water tank is with wholly
high strength ,without leakage &deformation ,and is easy to maintenance.
GRP water tank physical and chemical properties
|
Project |
Performance index |
|
Tensile strength (Mpa) |
≥60 |
|
Bending strength (Mpa) |
≥100 |
|
Bending modulus (Gpa) |
≥7.0 |
|
Pap hardness |
≥60 |
|
Bibulous rate,% |
≤1.0 |
|
Glass fiber content,% |
≥25 |
FRP water tank performance
|
Project |
requirements |
|
Leakage |
No leakage after filled with water |
|
Full of water deformation |
Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
|
Water quality |
Accord with GB5740 |
Accessories of 1 m3-1000 m3 FRP GRP SMC Water Tank Price Fiberglass Modular Water Storage Tank Bolted Water Tank
The water tank has been widely used in residential buildings, hotels, office buildings, R&D buildings, schools, malls, restaurants and other public facilities as well as places with high requirements for water quality, such as hospitals and food processing plants.STEP-BY-STEP ASSEMBLY
TANKS FROM 1 TO 10,000M3 (260 - 2,500,000 USG)
Despite its' great strength, GRP is lightweight - just 1/3 one third the weight of an equivalent steel panel. All panels can be lifted by hand, with no special equipment required
even where access is difficult, and installation can progress quickly and efficiently.
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
){kind=link}